22 Essential Safety Officer Quiz Questions & Answers for Workplace Safety

Introduction:

Being a safety officer requires a strong understanding of workplace hazards, OSHA regulations, PPE requirements, and best practices for accident prevention. Below are 22 essential quiz questions with answers to test and improve your knowledge in key safety areas.

---

Workplace Safety Regulations

1. What is the primary goal of workplace safety?

A) Reduce downtime
B) Increase productivity
C) Prevent workplace injuries and illnesses
D) Ensure company profitability
✅ Answer: C) Prevent workplace injuries and illnesses

2. Who is responsible for workplace safety?

A) Only the employer
B) Only the employees
C) Both employers and employees
D) The government
✅ Answer: C) Both employers and employees

3. What does OSHA stand for?

A) Occupational Safety and Hazard Association
B) Occupational Safety and Health Administration
C) Occupational Security and Health Authority
D) Office of Safety and Hazard Awareness
✅ Answer: B) Occupational Safety and Health Administration

---

Personal Protective Equipment (PPE)

4. Which of the following is NOT a type of PPE?

A) Hard hat
B) Safety goggles
C) High-visibility vest
D) Earphones for music
✅ Answer: D) Earphones for music

5. When should PPE be inspected?

A) Once a year
B) Before each use
C) Only after an incident
D) When an OSHA inspector arrives
✅ Answer: B) Before each use

6. What is the main purpose of wearing gloves in the workplace?

A) To keep hands warm
B) To protect against cuts, burns, and chemical exposure
C) To improve grip on tools
D) To match the uniform
✅ Answer: B) To protect against cuts, burns, and chemical exposure

---

Scaffolding Safety

7. At what height is fall protection required for scaffolding work?

A) 2 feet
B) 6 feet
C) 10 feet
D) 15 feet
✅ Answer: C) 10 feet

8. What is the minimum weight a scaffold must support?

A) 1.5 times the expected load
B) 2 times the expected load
C) 3 times the expected load
D) 4 times the expected load
✅ Answer: B) 4 times the expected load

9. Who is allowed to inspect scaffolding before use?

A) Any worker
B) The project manager
C) A competent person
D) The site owner
✅ Answer: C) A competent person

---

Work at Height Safety

10. What is the best way to prevent falls when working at heights?

A) Work faster
B) Use proper fall protection equipment
C) Wear slip-resistant shoes
D) Use a wooden ladder
✅ Answer: B) Use proper fall protection equipment

11. What is the function of a harness in fall protection?

A) To support the worker’s back
B) To prevent slips
C) To stop a fall and distribute impact force
D) To make movement easier
✅ Answer: C) To stop a fall and distribute impact force

12. When using a ladder, what is the safest climbing technique?

A) Climb with one hand free
B) Keep three points of contact at all times
C) Move quickly to reduce time on the ladder
D) Carry tools while climbing
✅ Answer: B) Keep three points of contact at all times

---

Excavation Safety

13. What is the most common hazard in excavation work?

A) Slips and trips
B) Trench collapse
C) Falling objects
D) Loud noise
✅ Answer: B) Trench collapse

14. How far should materials be kept from the edge of an excavation?

A) 6 inches
B) 12 inches
C) 2 feet
D) 5 feet
✅ Answer: C) 2 feet

15. What should be done before beginning excavation work?

A) Check for underground utilities
B) Start digging immediately
C) Wait for the weather to be clear
D) Get safety gloves
✅ Answer: A) Check for underground utilities

---

OSHA Standards & Compliance

16. What does OSHA require for emergency exits?

A) They should be locked for security
B) They must be well-lit and unobstructed
C) They should only be used in case of a fire
D) They must be made of steel
✅ Answer: B) They must be well-lit and unobstructed

17. What is the OSHA-recommended noise exposure limit?

A) 50 dB for 8 hours
B) 85 dB for 8 hours
C) 100 dB for 8 hours
D) 120 dB for 8 hours
✅ Answer: B) 85 dB for 8 hours

18. What is the first step in hazard identification?

A) Reporting to OSHA
B) Conducting a risk assessment
C) Implementing controls
D) Assigning a safety officer
✅ Answer: B) Conducting a risk assessment

---

Emergency Preparedness & Fire Safety

19. What type of fire extinguisher should be used for electrical fires?

A) Class A
B) Class B
C) Class C
D) Class D
✅ Answer: C) Class C

20. What is the "Stop, Drop, and Roll" technique used for?

A) Fire drills
B) Extinguishing clothing fires
C) Preventing falls
D) Handling fire extinguishers
✅ Answer: B) Extinguishing clothing fires

---

Hazardous Materials & Chemical Safety

21. What does an SDS (Safety Data Sheet) provide?

A) A list of workplace rules
B) Information on chemical hazards and handling
C) Instructions for machine operation
D) Payroll information
✅ Answer: B) Information on chemical hazards and handling

22. Which symbol represents a biohazard?

A) A flame
B) A skull and crossbones
C) Three interlocking circles
D) A radiation symbol
✅ Answer: C) Three interlocking circles

---

Conclusion

Safety officers play a crucial role in maintaining a secure workplace. These quiz questions help reinforce essential safety knowledge. Keep testing your understanding and stay updated with OSHA regulations to ensure a safer work environment.

FAQs

❓ 1. How often should safety training be conducted?
✔️ At least annually, with additional sessions as needed.

❓ 2. What is the best way to report a safety hazard?
✔️ Report it to a supervisor or safety officer immediately.

❓ 3. Can PPE be shared among workers?
✔️ No, PPE should be assigned individually to ensure hygiene and proper fit.

---

Download Safety Quiz PDF