ADIS Safety Diploma (MSBTE) Solved Question Paper (Objective)
If you're preparing for the ADIS Safety Diploma exam under MSBTE, you know how crucial it is to practice with objective questions. This blog post provides solved questions to help you ace your exam. Let's dive into some important objective questions and their answers.
ADIS - MSBTE Solved Objective Questions
1. Squaring Shears Safety Measure
Question: One of the measures in mental shears and slitters is squaring shears should have a fixed barrier guard placed at least .......... away from the shear (knife) and not more than .......... above the table.
a. 5mm, 7mm
b. 12mm, 10mm
c. 15mm, 20mm
d. 25mm, 30mm
Answer: b. 12mm, 10mm
2. Hazard-Free Mechanism
Question: ................... indicates parts so constructed as to cause no hazard viz. shaft sliding and link mechanism so located or with slow speed that their contact is not dangerous.
a. Safety by construction
b. Safety by position or location
c. Safety by design
d. Safety by guarding
Answer: c. Safety by design
3. Machine Processing Area
Question: That area on a machine where material is positioned for processing by the machine and where work is actually being performed on the material (feeding point, Hopper) is called as:
a. Zero mechanical state (ZMS)
b. Point of operation
c. Guarding
d. Prime mover point
Answer: b. Point of operation
4. Minimum Fencing Requirement
Question: Fencing means guarding by means of a locked fence or rail enclosure which restricts access to the machine except by authorized personnel. The fencing must be a minimum .........
a. 2 meters
b. 1 meter
c. 5 meters
d. 3 meters
Answer: a. 2 meters
5. Mechanical Hazard Area
Question: A hazard area created by two or more mechanical components rotating in opposite directions in the same plane and in close conjunction or interaction e.g., calendar rolls, in running rolls of textile or paper machines is termed as ..........
a. Tool point
b. Ingoing (in-running) Nips
c. Shear points
d. Feed points
Answer: b. Ingoing (in-running) Nips
6. Computer Usage Hazards
Question: One of the hazards in the use of computers for various applications (Documentation, reporting, data storage, presentation, etc.) is psychological problems like monotonous work in an isolated position, waiting times, intense concentration (e.g., traffic control). What are the control measures?
a. Computer room should not be too noisy, too warm, too cold, unpleasant, humid, congested, or poorly lighted.
b. Antiglare screen or auto glare (strain) removal device
c. Good design and layout of computer room, equipment, fire protection system records protection, utilities protection, and safe storage practices
d. Using a computer mouse for a long time to be avoided.
Answer: c. Good design and layout of computer room, equipment, fire protection system records protection, utilities protection, and safe storage practices
7. Safety Measures in Moulding Operation
Question: Safety aspects and preventive measures in moulding operations: What are the safety measures in case of health hazard due to sand, free silica, silicones, and zircon, silicosis, silica dust in sand handling, shakeout, and slinging operation?
a. Fire retardant protective clothing, head protection
b. Emergency shower, eye wash bottle, barrier cream
c. Good housekeeping, local exhaust system, vacuum cleaning
d. Dual safety squeeze controls and knee valve jolt control.
Answer: c. Good housekeeping, local exhaust system, vacuum cleaning
8. Vibration Hazard in Chipping
Question: Chipping is effectively used to take out unwanted hard, tough material or to cut jobs in a short time. One of the hazards in this process is that the operator has to experience continuous vibration while using the chipping tool. What preventive actions will you take?
a. Soft padded hand gloves may be used for relief while operating the tool.
b. Wear safety shoes to save from sharp pieces scattered on the ground.
c. If work is of longer duration, some rest may be given to hands. During this rest period, other supplementary activities can be completed.
d. Options A and C are true
Answer: d. Options A and C are true
9. Hot Rolling Mill Hazards
Question: Hazards in hot rolling mill operation: Harmful gases from lead alloy rolling or cutting, gas cutters, or butt welding (ozone effect), pit furnace and reheating furnace need:
a. Proper supervision
b. Effective exhaust
c. Trained workforce
d. Hand tools and tongs to hold hot material should be well designed, frequently inspected, and well maintained
Answer: b. Effective exhaust
10. Safety in Pattern Making
Question: Safety Aspects and Preventive Measures in Pattern Making: What are the safety measures?
a. Provide ear protection
b. Local exhaust ventilation
c. Earthing
d. Guarding and safe operation
Answer: b. Local exhaust ventilation
11. Textile Industry: Doubling Machines
Question: Textile industry: Doubling Machines (frames): What are the safety measures for drives?
a. Hydraulic braking system should be provided to stop the beam within shortest possible time.
b. Beam side distance guard (rod) should be interlocked (Contact switch) with drum which drives the beam.
c. The gap between the moving parts of conveyor and fixed parts should be checked all along its length and reduced to the minimum by suitable covers/guards.
d. Main drive pulley belt and head stock gearing should be guarded, delivery roll gears should be guarded.
Answer: d. Main drive pulley belt and head stock gearing should be guarded, delivery roll gears should be guarded.
12. Textile Industry: Bleaching Process
Question: Textile Industry: Bleaching Process: Purpose is to whiten the cloth or yarn (threads). Normally chlorine or hydrogen peroxide are used as bleach liquors. What are the safety measures to be taken?
a. Concentration of chlorine, sodium hypochlorite, or hydrogen peroxide should be within safe limits
b. Emergency kit to handle chlorine leak should be kept ready.
c. Proper respirator, eye goggles, and gloves should be worn while working near chlorine gas
d. All the options A, B, and C are true.
Answer: d. All the options A, B, and C are true.
13. Preventing Unexpected Equipment Start
Question: Which procedure is required to prevent an accident from unexpected starting or operation of any equipment when some repair or maintenance work is to be started?
a. Protective Multiple Earthing (PME) System
b. Lockout and Tag out
c. Earth leakage circuit breaker
d. Combined Voltage-Operated and differential current circuit-breaker
Answer: b. Lockout and Tag out
14. Electrical Hazards
Question: Say true or false:
1. Injuries are possible without current flowing through the body.
2. Main protection from electrical hazards are proper fuses, switchgears, circuit breakers, earthings, and bonding.
a. 1 is true, 2 is false
b. 1 is false, 2 is true
c. Both 1 and 2 are true
d. Both 1 and 2 are false
Answer: b. 1 is false, 2 is true
15. Effects of Electrical Current on Human Body
Question: Effect of DC and AC (current) on the human body of DC 400-800 mA and AC 50-100 mA (50Hz) is:
a. Some loss of muscular control
b. Possible heart failure (ventricular fibrillation)
c. Mild shock
d. Usually fatal
Answer: b. Possible heart failure (ventricular fibrillation)
16. Accident-Prone Body Parts in Electrical Industry
Question: A study of the electrical equipment industry has shown accidents to body sites. According to this, to the extent of 33% happen to which part of the body?
a. Head
b. Eyes
c. Fingers
d. Feet
Answer: c. Fingers
17. Internal Lightning Protection System
Question: An overall lightning protection system consists of external lightning protection (lightning protection/earthing) and internal lightning protection. The function of an internal lightning protection system is:
a. Interception of direct lighting strikes via an air-termination system
b. Safe discharge of lightning current to earth via a down-conductor system
c. Distribution of the lightning current in the ground via an earth-termination system
d. Prevention of dangerous sparking in the structure by establishing equipotential bonding
Answer: d. Prevention of dangerous sparking in the structure by establishing equipotential bonding
Conclusion
Preparing for the ADIS Safety Diploma (MSBTE) exam can be challenging, but having access to solved question papers, particularly objective questions, can significantly enhance your study process. By practicing with these questions, you can familiarize yourself with the types of questions that are likely to appear on the exam and understand the rationale behind the correct answers.
From understanding the importance of fixed barrier guards in squaring shears to recognizing the significance of safety by design, this blog post covers essential safety measures and concepts. Key topics include the point of operation on machines, minimum fencing requirements, and hazards associated with mechanical components like ingoing (in-running) nips. Additionally, safety measures for computer usage, moulding operations, chipping, hot rolling mills, and pattern making are thoroughly discussed.
For those involved in the textile industry, understanding the safety measures for doubling machines and the bleaching process is crucial. The importance of lockout and tag-out procedures to prevent unexpected equipment start, electrical hazard protections, and the effects of electrical current on the human body are also highlighted. Furthermore, the significance of internal lightning protection systems and the high accident rates in the electrical equipment industry emphasize the need for stringent safety protocols.
By using this comprehensive guide to solved objective questions, you can ensure you're well-prepared for the ADIS Safety Diploma (MSBTE) exam. This preparation not only helps in passing the exam but also equips you with the knowledge to implement effective safety measures in various industrial settings. Focus on these key areas, and you’ll be well on your way to success.
Remember, thorough preparation using resources like solved question papers is essential for mastering the ADIS Safety Diploma (MSBTE) exam. Stay diligent, practice regularly, and make sure to understand the underlying safety principles. This approach will not only help you pass the exam but also enhance your ability to contribute to a safer working environment.
ADIS Safety Diploma (MSBTE), solved question paper, objective questions, safety measures, and industrial safety—you can improve your search results and ensure that this blog post reaches those who need it most. Whether you are a student preparing for the exam or a professional seeking to enhance workplace safety, this guide is an invaluable resource.
.jpg)
 Solved Question Paper (Objective)){kind=link}
1 Comments
Thanks for sharing this MSBTE ADIS objective.
ReplyDeleteHow to download last 3 years.